Maintenance For Sail Boats. Hulls Should Be Cleaned And Inspected While Zinc Anodes Checked For Corrosion.



Maintenance For Sail Boats. Hulls Should Be Cleaned And Inspected While Zinc Anodes Checked For Corrosion.

While maintenance on your sailing boat may seem like a chore, it is an important part of safety procedures. A well-maintained boat is a safe one that will give years of useful service and not leave you stranded anywhere – at least not due to breakdowns. And when the time comes to trade her on another model, you’ll get a much better deal for a boat that is in top condition.

Maintenance For Sail Boats. Hulls Should Be Cleaned And Inspected While Zinc Anodes Checked For Corrosion.

Boating Tips Tricks | Boating Tips Docking | Boating Tips For Beginners | Boating Tips For Rough Seas | Boating Tips Rough Water | Encyclopedia Of Boating Tips | Safe Boating Tips | Summer Boating Safety Tips

Powered By z248.com

One of the most important parts of the boat is the invisible part – that which is below the waterline. If this is left fouled with marine growth it will affect the performance of the boat when maneuvering, which could be dangerous.

Maintaining the boat bottom correctly includes getting rid of all the growths like barnacles and weed, and keeping it waterproofed. Through hulls should be cleaned and inspected, while zinc anodes should be checked for corrosion and replaced if necessary. Propellers must also be checked and replaced if damaged.

The deck is another important part of the boat and should be washed daily to get rid of grime and oil that can be tracked in off the street. In fact it’s a good idea to keep shoes especially for wearing in the boat – and make sure you NEVER wear them off the boat. Back to the scrubbing! If it is done every day it will be an easy task. If not, then oil and grime will build up quickly and cause stains that are almost impossible to get out, not to mention making it slippery.

Your deck needs to be washed thoroughly and coated with a non-skid finish that will make it easier to wash down the next time. Of course, never wax it! Vinyl seats need to be cleaned and dressed with an appropriate product to keep the sun and salt build up from cracking them.

The whole boat will benefit from a complete wash down every week to get rid of the salt and grime build up. Parts of the boat that are not walked on should be waxed, or polished with another suitable polish if it is metal. When storing your sailboat for the winter, be sure and put anti-freeze into those areas that cannot be drained of water.

There may be certain maintenance chores that you cannot do due to lack of knowledge. Not everyone can fix up an engine – or even know when it needs repair. In this case, have a professional look at it for you. Bilges, filters and pumps, dock lines and the fuel system and the head should all be checked over for wear, leaks and corrosion.

Maintenance For Sail Boats. Hulls Should Be Cleaned And Inspected While Zinc Anodes Checked For Corrosion.

Boating Tips Tricks | Boating Tips Docking | Boating Tips For Beginners | Boating Tips For Rough Seas | Boating Tips Rough Water | Encyclopedia Of Boating Tips | Safe Boating Tips | Summer Boating Safety Tips

Powered By z248.com